Minggu, 12 Januari 2014

Jual Protek 6510 100MHz Oscilloscope

Features
1. Four traces may be simultaneously displayed in ALT-sweep
2. Five vertical display modes: CH1, CH2, Dual, Add, Subtract
3. Vertical mode triggering for displaying 2 unrelated signals
4. Trigger hold-off circuit for synchronizing complex waveforms
5. Sweep speeds to 2nS/ Div
6. 12kV acceleration voltage for bright displays of low duty cycle signals
7. Z axis input
8. TV Synchronization for either line or field patterns
9. 20MHz bandwidth limit switch for triggering signals in a noisy environment

Product Information
100 MHz 2Ch. Dual Time Base with Alt Mag.

Specifications
Vertical Amplifier ( CH 1 and CH 2)
a) Sensitivity : 5 mV/ Div to 5 V/ Div in 7 calibrated steps, ( X5 Mag 1mV/ Div to 1 V/ Div)
b) Accuracy : ± 3% ( ± 5% in X5 Mag)
c) Bandwidth ( -3dB) : DC to 100MHz
d) Rise Time : £ 3.5 ns, X5 Mag: 20MHz Bandwidth: £ 17 ns
e) Input Impedance : 1MW + 25 pF
f) Input Coupling : AC-Gnd-DC
g) Invert Channel : CH2
h) Display Modes : CH1, CH2, Add, Subtract, Dual ( Alt/ Chop)
i) Maximum Input Voltage : 400V ( DC or AC peak)
j) CH1 Signal Output : 20mV into 50W
Horizontal Sweep
a) Timebase A - Sweep Time : 50ns/ Div to 0.2 s/ Div in 21 calibrated steps ( 1-2-5)
b) Timebase A - X10 Mag : 5ns/ Div to 20ms/ Div
c) Timebase A - Accuracy : ± 3% ( ± 5% in X10 Mag)
d) Timebase A - Hold Off : Continuously adjustable to > 2X sweep time
e) Timebase B - Sweep Time : 50ns/ Div to 10µ s/ Div in 8 steps ( 1-2-5)
f) Timebase B – Accuracy : ± 3%
g) Timebase B - Delay Time : Continuously variable from 0.2µ s to 2s
h) Timebase B - Delay Modes : Continuous or triggered
i) Timebase B - Sweep Displays : A, B, A alt B, B triggered, X-Y
X-Y Mode
a) CH1-X axis, CH2-Y axis Sensitivity : Same as CH1 vertical amplifier
b) Bandwidth ( X-axis) : DC to 2MHz
c) Phase Error : £ 3° DC to 10kHz
Triggering
a) Trigger Modes : Auto, Normal, TV-V, TV-L
b) Source : Int. CH2, line ext.
c) Coupling : AC
d) Slope : Positive or negative
e) Trigger Sensitivity :
1. Int ( DC to 10MHz) : 0.5 Div
2. Int ( 10MHz to 100MHz) : 1.5 Div
3. Ext ( DC to 10MHz) : 200mV
4. Ext ( 10MHz to 100MHz) : 500mV
5. TV ( Int) : 1 Div Min
6. TV ( Ext) : 1V P-P
f) External Trigger Input : Impedance: 1MW + 20 pF
g) Maximum Input Volts : 400V DC or AC peak
Z Axis Modulation
a) Sensitivity : ± 5V P-P Intensity increases with a negative going voltage input
b) Bandwidth ( -3dB) : DC to 2MHz
c) Input Impedance : Approx. 2 KW
Calibrator Signal
a) Voltage : 0.5V ± 3% P-P 1kHz Square Wave
b) Duty Cycle : Approx. 50%
CRT
a) Type : 6 " rectangular CRT with internal graticule. ( 1 Div = 1cm)
b) Acceleration Voltage : 12 kV
General Specification
a) Power Requirements : AC Input Voltage: 100V, 120V, 220V, 240V selectable
b) Frequency : 50/ 60Hz
c) Power Consumption : 55W
d) Operating Temperature : 0 to 40° C at 35% to 85% relative humidity
e) Dimensions : 5.25 " H × 12.67 " W × 14.5 " D
f) Weight : 24 lbs.
g) Supplied Accessories : Manual, 1 AC Power cord, ( 2) X10 Probes.

 

Info dan harga terbaik hubungi :

Ahmad Wahyudi


JL Pesantren no.64 Jurang Mangu Timur
Pondok Aren
Tangerang Selatan 15222

( Belakang Toko Bangunan NUGRAHA No.88 )

Tlp 021 3649 5553
Fax. 021 7303447
Hp . 0812-1807 0051 / 0878-7841 4326

Email : yudi.rajasurvey@gmail.com

website           : www.raja-survey.com
indonetwork  : http://alatukurmurah.indonetwork.co.id 
blogger           : djakartainstrument28.blogspot.com
                            djakartainstrument.blogspot.com

 


Tidak ada komentar:

Posting Komentar